Gutters & Downpipe Freeze Protection DIY Kits

Snow that has built up on a roof will start to melt as a result of either exposure to the sun, or from heat rising from the building below. As the melted snow runs from the roof into cold gutters and drainpipes, it can then re-freeze forming layers of ice which can continue to build up until the flow is blocked. This can result in damaged drains and gutters. Water can, in addition, get into the roof and building, leading to expensive structural damage such as broken roof tiles, damaged plaster, facades, etc.

Ezeheat has the solution in the form of  IcSR(e). The self-regulating characteristics of the heating cable mean that the cable can adjust its heat output in accordance with its temperature. It cannot overheat or burnout, even when overlapped. The Ezeheat Guttertrace system is easy to install. The cable is laid along the gutters and in drainpipes (as shown in the application guide) to keep water flowing freely. The Gutter Trace heating cable is suspended in the downpipe without the need for spacers.

Temperature maintenance up to:
IcSR(e) 80°C (176°F) (Power-on)

Continuous exposure up to:
IcSR(e) 100°C (212°F) (Power-off)

Rated Output
IcSR(e)40 Watt / m @ 0°C (Ice + Water)

Heating Cable approx. dimensions
13.4mm x 5.4mm, IcSR & IcSR(e)

Bus Wire -ASTM B355 Class 2 NPC 16 AWG

Outer Jacket

– P: Polyolefin (UV)

– F : Fluoropolymer ( Corrosive Area or UV)

Certification

Power Output Graph

It will not burn or overheat even when overlapped
It self-regulates thermal performance in response to temperature
It can be cut to any length to suit any installation condition
Independent heat output control along the length
Soft (power) switching for energy-saving (which improves energy efficiency) and for a longer service life
Easy connection for powering and splicing.
Flexible and flat to suit complicated shape of work piece
Weather-proof ex. U.V, heat and rain